mo13.jpg (11284 bytes)
SINGLE AND DUAL OUTPUT              (FDC10 & FDC10-W)
10 WATTS DC/DC CONVERTERS

pr13.jpg (20328 bytes)
  • 2 : 1 AND 4 : 1 INPUT RANGE
  • EFFICIENCY UP TO 84%
  • SIX-SIDED SHIELD
  • 2 x 1 x 0.4 INCHES
  • OVER CURRENT PROTECTION
  • INTERNATIONAL SAFETY STANDARD APPROVAL
  • UL      UL1950    E193009
  • TUV   EN60950  R2054609
  • CB     JPTUV-001422
  • CE     CE MARK
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load, and 25ΊC unless otherwise noted
INPUT SPECIFICATIONS

Input voltage range   12V nominal………..……….....….........…...…......………9 to 18V
                                24V nominal…........……..……..............…….............….18 to 36V
                                48V nominal…........……..……..............…….............….36 to 75V
"W" Series                24V nominal........................................................................9 to 36V
                                48V nominal......................................................................18 to 75V
Input filter………………………………...………..……......…...……..  .......….Pi Type

OUTPUT SPECIFICATIONS

Output voltage accuracy.............................................................................................±2%
Output balance, dual output…....................................................................................±1%
Ripple and noise, 20MHz BW
Single output....…….…………......................................................50mVP-P,20mV RMS
Dual output.....................……..……..............…..…......................75mVP-P,20mV RMS
Line regulation, HL-LL.....…….…………....................................................……....±1%
Load regulation, FL to 1/10 FL………....……...…......…..........±1%(Single), ±2%(Dual)
Efficiency…………………..………………………........…..…....……...…SEE TABLE
Temperature coefficient………….………………….....……......….....…...…±0.02%/ΊC
Short circuit protection………………………..............................…............…Continuous Over voltage protection threshold:
3.3V Output……………….......................................……................................….3.9V
5V Output..……….......................................................................................…......6.2V 12V Output……………….........................................……................................….15V 15V Output..………......................................................................................…......18V Transient response recovery time,
25% load step change………....................................................................…......500΅ sec

GENERAL SPECIFICATIONS

Switching frequency……………………………..….............…......…………300kHz,typ
Isolation voltage…………………………………....…..........…….…..…1600VDC,Min
Isolation resistance………....………………….…....….....…....……....….109Ohms,Min

ENVIRONMENTAL SPECIFICATIONS (REFERENCE)

Operating temperature range………………….....…….....…....….……..-25ΊC to +71ΊC
"M1" (Option)……………………....……...............................…………-40ΊC to +85ΊC
"M2" (Option) …..................................................................….....……...-40ΊC to +71ΊC
Storage temperature range………………...….....…………...........……-55ΊC to +105ΊC
Case temperature…………….......................................…..........……...……100ΊC max.
Cooling………....………………………….....…………..........…….Free-air convection
EMI/RFI……….....…...….....….......................................................Six-sided continuous
MTBF…….......................….5.342 x 105Hour (MIL-HDBK-217F TA=25ΊC Full Load)

PHYSICAL SPECIFICATIONS

Case Material……….....…...........…..Nickel-Coated Copper with Non-Conductive Base
Dimensions………..…….…......…...…….2.0 x 1.0 x 0.4 Inches (50.8 x 25.4 x 10.2mm)

MODEL
NUMBER

OUTPUT
VOLTAGE

OUTPUT
CURRENT		% typ.
EFF		INPUT
RANGE
FDC10-12S333.3VDC2000mA766800uF
FDC10-12S055VDC2000mA794700uF
FDC10-12S1212VDC830mA82690uF
FDC10-12S1515VDC670mA82470uF
FDC10-12D05+/-5VDC+/-1000mA79+/-680uF
FDC10-12D12+/-12VDC+/-416mA81+/-330uF
FDC10-12D15+/-15VDC+/-333mA81+/-110uF
FDC10-24S333.3VDC2000mA786800uF
FDC10-24S05(W)5VDC2000mA81(W=79)4700uF
FDC10-24S12(W)12VDC830mA84(W=82)690uF
FDC10-24S15(W)15VDC670mA84(W=82)470uF
FDC10-24D05(W)+/-5VDC+/-1000mA80(W=78)+/-680uF
FDC10-24D12(W)+/-12VDC+/-416mA82(W=80)+/-330uF
FDC10-24D15(W)+/-15VDC+/-333mA82(W=80)+/-110uF
FDC10-48S333.3VDC2000mA796800uF
FDC10-48S05(W)5VDC2000mA82(W=80)4700uF
FDC10-48S12(W)12VDC830mA86(W=84)690uF
FDC10-48S15(W)15VDC670mA86(W=84)470uF
FDC10-48D05(W)+/-5VDC+/-1000mA80(W=78)+/-680uF
FDC10-48D12(W)+/-12VDC+/-416mA84(W=82)+/-330uF
FDC10-48D15(W)+/-15VDC+/-333mA84(W=82)+/-110uF


Pin Connections
Pin#SingleDual
1+Vin+Vin
2-Vin-Vin
3+Vout+Vout
4No PinCommon
5-Vout-Vout
  OPERATING TEMPERATURE LIMITS AND OUTPUT POWER RANGE