Input voltage range   24V nominal………..……….....…...….........…......………9 to 36V
                                48V nominal…........……..…….........……...................….20 to 75V
Input filter…………………………………………..………...……........  .......….Pi Type

Output voltage accuracy.............................................................................................±2%
External trim adjustment range….........................................................................±10%typ.
Ripple and noise, 20MHz BW.........................................................75mVP-P,15mV RMS
Line regulation, HL-LL.....…….…………..................................................……....±0.5%
Load regulation,                                                                                                                  FL to 1/10 FL……….............................……….....…...............±1%(Single), ±5%(Dual)
Efficiency…………………..………………………..…..…...........……...…SEE TABLE
Temperature coefficient………….………………………......…...........…...…±0.02%/ºC
Short circuit protection………………………...............................…............…Continuous Over voltage protection threshold:
5V Output………………................................................…….............................….6.2V 12V Output..………...................................................................................................15V 15V Output..……….........................................................................................…......18V Transient response recovery time,
25% load step change………...............................................................…............500µ sec

Control voltage referenced to negative (-)input
Compatibility.….............................................................................................CMOS,TTL.
On-control.…………………………………....….....…........….…..…4.8V min. or Open
Off-control………....…............……………….…....……....……....…0.4V min. or Short

Switching frequency………………………….......................................….......270kHztyp.
Isolation voltage…………………………………....…...........…….…..…1600VDC,Min
Isolation resistance………....………………….…....……..........……....….10⁹Ohms,Min

Operating temperature range………………….....……......…....….……..-25ºC to +70ºC
                "M2" (Option) …..................................................….....……...-40ºC to +70ºC
Storage temperature range………………...…...........………….....……-55ºC to +105ºC
Case temperature…………….............................................….....……...……100ºC max.
Cooling………....………………………….....…......……….....…….Free-air convection
EMI/RFI……….....…...….....…........................................................Six-sided continuous
MTBF……........................….5.591 x 10⁵Hour (MIL-HDBK-217F TA=25ºC Full Load)

Case Material……......……...........…..Nickel-Coated Copper with Non-Conductive Base
Dimensions………..…......….….…...…….2.0 x 1.6 x 0.4 Inches (50.8 x 40.6 x 10.2mm)