Input voltage range   12V nominal………..……….....…...…........…......………9 to 18V
                                24V nominal…........……..…….........……..................….18 to 36V
                                48V nominal…........……..……..............…….............….36 to 75V
Input filter…………………………………………..………........……..  .......….Pi Type

Output voltage accuracy............................................................................................±1%
Voltage balance, dual output…..................................................................................±1%
Ripple and noise, 20MHz BW
Single output....…….………….....................................................50mVP-P,20mV RMS
Dual output.....................……..……..............…..….....................75mVP-P,20mV RMS
Line regulation, HL-LL.....…….…………....................................................……....±1%
Line regulation, FL to 1/10 FL………....…………....................±1%(Single), ±2%(Dual)
Efficiency…………………..………………………..…........…....……...…SEE TABLE
Temperature coefficient………….………………………...........….....…...…±0.02%/ºC
Short circuit protection………………………..............................…............…Continuous Over voltage protection threshold:
3.3V Output……………….......................................……..................................….3.9V 5V Output..……….........................................................................................…......6.2V 12V Output……………….........................................….....….............................….15V 15V Output..………........................................................................................…......18V Transient response recovery time,
25% load step change………....................................................................…......500µ sec

Switching frequency………………………….......….......500kHz(Single), 300kHz,(Dual)
Isolation voltage……………………………….....…....….....…….…..…1600VDC,Min
Isolation resistance………....…………………......…....……....……....….10⁹Ohms,Min

Operating temperature range…………………..........………....….……..-25ºC to +71ºC
                "M2" (Option) ….................................................….....……...-40ºC to +71ºC
Storage temperature range………………...…..........………….....……-55ºC to +105ºC
Case temperature……………............................................….....……...……100ºC max.
Cooling………....…………………………..........………….....…….Free-air convection
EMI/RFI……….....…...….....….......................................................Six-sided continuous
MTBF…….......................….5.651 x 10⁵Hour (MIL-HDBK-217F TA=25ºC Full Load)

Case Material…………................…..Nickel-Coated Copper with Non-Conductive Base
Dimensions………..……......….…...…….2.0 x 1.0 x 0.4 Inches (50.8 x 25.4 x 10.2mm)