| All
specifications are typical at nominal input, full load, and 25ΊC unless otherwise
noted |
| INPUT SPECIFICATIONS |
| Input
voltage range 5V nominal
..
.....
...
.........
......
9
to 18V
12V nominal
........
..
.........
......
.............
.18
to 36V
24V nominal.......................................................................36
to 75V Input filter
..
.........
.. .......
.Pi Type |
| OUTPUT SPECIFICATIONS |
| Output
voltage accuracy
.
.......................................
...
.±2% max. Voltage balance, dual output.
......................................................................±2% max. Ripple and noise, 20MHz BW..
......
.
............
..
.........50mV
p-p Line regulation, HL-LL.....
.
..............................................
....±0.2% max. Line regulation, FL to 1/4 FL
..
......
............±0.2%(Single), ±1%(Dual) Efficiency
..
......
..
..
....
...
SEE
TABLE Temperature coefficient
.
......
......
.....
...
±0.02%/ΊC Short circuit protection
............................
............
..Continuous
Transient response recovery time, 25% load step change
.............................................
......200΅
sec |
| REMOTE
ON/OFF CONTROL |
| Control
voltage referenced to negative (-)input Compatibility
..........................................
.....CMOS,TTL
On-control....
.
......................
.........
4.8V min. or Open Off-control
..
...................................
..0.4V
max. or Short |
| GENERAL
SPECIFICATIONS |
| Switching
frequency
..............
......
...
300kHz Isolation voltage
..........
.....
........
..
1600VDC
Isolation
resistance
....
.
..........
....
.......
.109Ohms |
| ENVIRONMENTAL SPECIFICATIONS (REFERENCE) |
| Operating temperature
range
.....
......
....
.
..-25ΊC to +71ΊC Storage temperature range
....
...........
-55ΊC
to +105ΊC Case temperature
.............................................
.....
...
100ΊC
max. Cooling
....
.....
......
.....
.Free-air convection
EMI/RFI
.....
...
...
........................................................Five-sided
continuous MTBF
........................
.7.189 x 105Hour
(MIL-HDBK-217F TA=25ΊC Full Load) |
| PHYSICAL SPECIFICATIONS |
| Case
Material
.................
..Nickel-Coated Copper with Non-Conductive Base
Dimensions
.......
.
...
.1.25 x 0.8 x 0.4 Inches (31.8 x 20.3 x 10.2mm)
|