Welcome to Power Mate Technology

SINGLE AND DUAL OUTPUT
DC/DC CONVERTERS

pr9.jpg (19612 bytes)

IDEAL FOR TELECOM/NETWORKING APPLICATION
2:1 INPUT RANGE
EFFICIENCY UP TO 80%
1.25 x 0.8 x 0.4 INCHES
OVER CURRENT PROTECTION

ELECTRICAL SPECIFICATIONS

All specifications are typical at nominal input, full load, and 25ºC unless otherwise noted

INPUT SPECIFICATIONS

Input voltage range         12V nominal…....……........…...…...….........………9 to 18V
                                      24V nominal…........……..........……........…….......18 to 36V
                                      48V nominal.............................................................36 to 75V
Input filter…………………………………………..………...……..... .......….Pi Type

OUTPUT SPECIFICATIONS

Output voltage accuracy ….…….…................................…...............……...…….±2%
Output voltage balance, dual outputs …................................…..….........…...…….±2%
Ripple and noise, 20MHz BW 3.3/5V.……..…........................…........75mV p-p max.
                                                           ....…........................…...±1% p-p of Vout max.
Line regulation, Single output..................................….……....…..……......…......±0.2%
                        Dual output..................….……......……..................…......…......±0.2%
Load regulation,F.L-1/4F.L..........................….……..…....±0.5%(Single)    ±1%(Dual)
Efficiency……….………………………........…............................…...…SEE TABLE
Temperature coefficient………….………………………........….....…...…±0.02%/ºC
Over protection…...............……………...………………….............…......Continuous

GENERAL SPECIFICATIONS

Switching frequency………………………………........….......….………100kHz, typ.
Isolation voltage, standard models....…....….....………....................…..1600VDC,min. Suffix "H" models.....…………………............…..…….........................3000VDC,min. Isolation resistance......…………………............…..……...................….10⁹Ohms,min. Isolation capacitance...………………...................................................…..300pF max.

ENVIRONMENTAL SPECIFICATIONS (REFERENCE)

Operating temperature range………………….....………....…...……..-25ºC to +71ºC
Storage temperature range……….....………….....…....................….-55ºC to +105ºC
Case temperature………………….....…………...............................…….100ºC max.
Cooling………….....………….....……...........................................Free-air convection
MTBF……….....…..........1.131 x 10⁶Hours (MIL-HDBK-217F TA=25ºC Full Load)

PHYSICAL SPECIFICATIONS

Case Material..……........................................................ Non-Conductive Black Plastic
Dimensions……………...….…...…….1.25 x 0.8 x 0.4 Inches (31.8 x 20.3 x 10.2mm)

MODEL NUMBER	OUTPUT VOLTAGE	OUTPUT CURRENT	% typ. EFF	CAPACITOR LOAD MAX.
PFKC05-12S33	3.3VDC	1000mA	72	2200uF
PFKC05-12S05	5VDC	1000mA	76	1000uF
PFKC05-12S12	12VDC	470mA	80	220uF
PFKC05-12S15	15VDC	400mA	80	150uF
PFKC05-12D05	+/-5VDC	+/-500mA	76	+/-680UF
PFKC05-12D12	+/-12VDC	+/-230mA	80	+/-100uF
PFKC05-12D15	+/-15VDC	+/-190mA	80	+/-68uF
PFKC05-24S33	3.3VDC	1000mA	72	2200uF
PFKC05-24S05	5VDC	1000mA	77	1000uF
PFKC05-24S12	12VDC	470mA	80	220uF
PFKC05-24S15	15VDC	400mA	80	150uF
PFKC05-24D05	+/-5VDC	+/-500mA	78	+/-680UF
PFKC05-24D12	+/-12VDC	+/-230mA	81	+/-100uF
PFKC05-24D15	+/-15VDC	+/-190mA	81	+/-68uF
PFKC05-48S33	3.3VDC	1000mA	72	2200uF
PFKC05-48S05	5VDC	1000mA	78	1000uF
PFKC05-48S12	12VDC	470mA	81	220uF
PFKC05-48S15	15VDC	400mA	81	150uF
PFKC05-48D05	+/-5VDC	+/-500mA	78	+/-680UF
PFKC05-48D12	+/-12VDC	+/-230mA	81	+/-100uF
PFKC05-48D15	+/-15VDC	+/-190mA	81	+/-68uF

Pin Connections
Pin#	Single	Dual
2	-Vin	-Vin
3	-Vin	-Vin
9	NC	Common
10	NC	NC
11	NC	-Vout
14	+Vout	+Vout
15	NC	NC
16	-Vout	Common
22	+Vin	+Vin
23	+Vin	+Vin

PIN CONNECTIONS
PIN#	Single	Dual
1	NC	NC
2	-Vin	-Vin
3	-Vin	-Vin
4	NC	NC
5	NC	NC
9	NC	Com
10	NC	NC
11	NC	-Vout
12	NC	NC
13	NC	NC
14	+Vout	+Vout
15	NC	NC
16	-Vout	Com
20	NC	NC
21	NC	NC
22	+Vin	+Vin
23	+Vin	+Vin
24	NC	NC

OPERATING TEMPERATURE LIMITS AND OUTPUT POWER RANGE